Badger Air-Brush Co 155 Anthem Airbrush

Product Information

Single needle/nozzle for spraying all mediums, inks, dyes, watercolors, acrylics, enamels, lacquers, glazes, latex, Air-Opaqueª, Air-Tex ®, MODELflex ® Totally Tattoo ® and Totally Tanª colors It has a 0.2ml nozzle set that paints down to about 1mm for detail, the internal 0.5ml or small 2ml paint cup can be used for this. As well as a 0.4mm nozzle set and 5ml paint cup for larger areas. It also has a preset handle to set the maximum paint flow. Not sure which other parts were also changed, normal route would be; 0.3mm needle, nozzle, nozzle cap and needle cap.

The revolution was a good introduction to modelling, but isn't flexible enough. As noted, the .35mm set up wasn't working for larger areas, but it will be the weekend before I can play with the various nozzles and some water or food colouring to see what coverage I can get with the standard 0.3 set up.

Comments

Don't spray too far away from the model either as your likely to get a rough finish where the paint is drying before it hits the model. Paul http://www.britmodeller.com/forums/index.php?/topic/234976552-iwata-triple-action-handle-issues/?fromsearch=1 The Anthem®, Model 155, is the most comfortable, reliable, proficient, cost effective, user friendly airbrush ever. The two angle needle tip precisely mates with the Anthem's cone shaped nozzle enabling a single needle/nozzle configuration to spray virtually any desired material, thus eliminating the need for fine, medium, or large needle/nozzle variations. The Anthem's body design provides exacting balance and long term user comfort. The Anthem® also provides flawless performance in the most rigorous of production airbrushing environments. I mainly work in 1/72. My smallest work would be a Luftwaffe mottle on a Bf109, the largest is the Vulcan which is stashed under the bed. Generally speaking, 1/72 fighters, both props and jets.

Single needle/nozzle for spraying all mediums, inks, dyes, watercolors, acrylics, enamels, lacquers, glazes, latex, Air-Opaqueª, Air-Tex®, MODELflex® Totally Tattoo® and Totally Tanª colors Fine nozzle set for details down to 1mm, high flow larger nozzle set and larger cup for area work.. The Anthem ®, Model 155, is the most comfortable, reliable, proficient, cost effective, user friendly airbrush ever. The two angle needle tip precisely mates with the Anthem's cone shaped nozzle enabling a single needle/nozzle configuration to spray virtually any desired material, thus eliminating the need for fine, medium, or large needle/nozzle variations. The Anthem's body design provides exacting balance and long term user comfort. The Anthem ® also provides flawless performance in the most rigorous of production airbrushing environments. FEATURES

Features

The triple action handle was good for ease of cleaning, but it's also good for fine(ish) work, such as pre-shading panel lines by setting the amount of paint required. Single needle/nozzle for spraying all mediums including inks, dyes, watercolors, properly reduced acrylics, enamels, lacquers, and airbrush-ready colors including Spectra Tex, Air-Opaque, Air-Tex, Model flex, and Totally Tattoo.

The Anthem also features the patented rear needle release allowing the user to remove the needle without having to remove the handle. The Anthem is a comfortable, reliable, proficient, cost effective, user friendly airbrush. The two angle needle tip precisely mates with the Anthem's cone shaped nozzle enabling a single needle/nozzle configuration to spray virtually any desired material, thus eliminating the need for fine, medium, or large needle/nozzle variations. The Anthem's body design provides exacting balance and long term user comfort. The Anthem also provides flawless performance in the most rigorous of production airbrushing environments. If you get dry paint building up on the air cap, this will allow you to just pinch clean the tip and for fine detailing gives you a great view of the needle tip.Single needle/nozzle for spraying all mediums such as inks, dyes, watercolors, acrylics, enamels, lacquers, glazes and latex. The Anthem is a comfortable, reliable, proficient, cost effective, user friendly airbrush. The two angle needle tip precisely mates with the Anthem’s cone shaped nozzle enabling a single needle/nozzle configuration to spray virtually any desired material, thus eliminating the need for fine, medium, or large needle/nozzle variations. The Anthem’s body design provides exacting balance and long term user comfort. The Anthem also provides flawless performance in the most rigorous of production airbrushing environments.